Four-lip seals replace the former double-lip seals (TSN .. G). When compared to double-lip seals, the new seals are more effective. They also generate less friction, which enables higher shaft speeds. Four-lip seals are radially split and easy to mount.FeaturesTemperature range: -40°C to +100°CMax. circumferential speed: 13 m/sSpecificationsInner Diameter: 135mmOuter Diameter: 200.1mmWidth: 16mm.
eBay
V ring seal for plummer block housing, on an Adapter sleeve. For bearing with a 18mm diameter.V-ring seals consist of a V-ring and a sheet steel sealing washer with a vulcanized rubber lip. The rubber lip fits into the seal groove in the housing. The washer is protected against corrosion. V-rings can accommodate circumferential speeds up to 7 m/s. For circumferential speeds between 7 and 12 m/s, they should be located axially on the shaft. At speeds above 12 m/s, a support ring must be used to prevent the seal from lifting.MaterialMaterial: nitrile rubber, steelTemperature range: -40°C to +100°CMax. circumferential speed: 7 m/s, 12 m/s for special conditionsSpecificationsInner Diameter: 80mmOuter Diameter: 113mmWidth: 4.8mm.
eBay
The main benefit of split Plummer block housings is their easy installation; pre-assembled shafts can be mounted in them.
eBay
The main benefit of split Plummer block housings is their easy installation; pre-assembled shafts can be mounted in them.
eBay
ID: SYNT35 L. Material:Cast iron, bearing made of standard bearing steel. Weight:3,800 kg. Most Order Will Processed With In 24 Hours or less. Manufacturer part number:377794.
eBay
eBay
Self-lubricating bearings, as the name suggests, provide their own lubrication during operation without requiring application of grease or oil lubricants.
eBay
V ring seal for plummer block housing, on an Adapter sleeve. For bearing with a 10mm diameter.V-ring seals consist of a V-ring and a sheet steel sealing washer with a vulcanized rubber lip. The rubber lip fits into the seal groove in the housing. The washer is protected against corrosion. V-rings can accommodate circumferential speeds up to 7 m/s. For circumferential speeds between 7 and 12 m/s, they should be located axially on the shaft. At speeds above 12 m/s, a support ring must be used to prevent the seal from lifting.MaterialMaterial: nitrile rubber, steelTemperature range: -40°C to +100°CMax. circumferential speed: 7 m/s, 12 m/s for special conditionsSpecificationsInner Diameter: 45mmOuter Diameter: 72.5mmWidth: 4.8mm.
eBay